Impact-induced phyllosilicate formation from olivine and water

Shock-recovery experiments on mixtures of olivine and water with gas (air) were performed in a previous study to demonstrate water-mineral interactions during impact events (Furukawa et al., 2007). The products of these former experiments were investigated in the present study using transmission electron microscopy, scanning electron microscopy, and X-ray powder diffraction with the aim of finding evidence of aqueous alteration. Serpentine formed on the surface of shocked olivine with well-developed mosaicism. The yield of serpentine depended on the water/olivine ratio in the starting material, indicating progressive serpentinization under water-rich conditions. Comminution and mosaicism were developed in shocked olivine grains. The temperature and pressure changes of the samples during the experiments were estimated by constructing Hugoniots for mixtures of olivine and water, combined with the results of an additional fracturing experiment on a shocked container. Pressures and temperatures reached 4.6-7.2 GPa and at least 230-390 °C, respectively, for 0.7 μs during in-shock compression. Post-shock temperatures reached a maximum of ∼1300 °C, when the shock wave reached the gas in the sample cavity. The serpentine formed after the post-shock temperature maximum, most likely when temperatures dropped to between 200 and 400 °C. This is the first experiment to demonstrate the formation of phyllosilicates using heat supplied by an impact. The present results and estimations suggest that phyllosilicates could form as a result of impacts into oceans as well as by impacts on terrestrial and Martian crustal rocks, and on some asteroidal surfaces, where liquid or solid H₂O is available. A significant amount of phyllosilicates would have formed during the late heavy bombardment of meteorites on the Hadean Earth, and such phyllosilicates might have affected the prebiotic carbon cycle.     

Characteristics of canopy interception loss in Moso bamboo forests of Japan

In recent years, Moso bamboo (Phyllostachys pubescens) forests have rapidly expanded in Japan by replacing surrounding coniferous and/or broadleaved forests. To evaluate the change in water yield from forested areas because of this replacement, it is necessary to examine evapotranspiration for Moso bamboo forests. However, canopy interception loss, one of the major components of evapotranspiration in forested areas, has been observed in only two Moso bamboo forests in Japan with relatively high stem density (~7000 stems/ha). There are, in fact, many Moso bamboo forests with much lower stem density. Thus, we made precipitation (Pr), throughfall (Tf) and stemflow (Sf) observations for 1 year in a Moso bamboo forest with stem density of 3611 stems/ha and quantified canopy interception loss (Ic). Pr and Ic for the experimental period were 1636 and 166 mm, respectively, and Ic/Pr was 10%. The value was approximately the same as values for the other two Moso bamboo forests and lower than values for coniferous and broadleaved forests. On the other hand, Tf/Pr and Sf/Pr for our forest (86% and 4%, respectively) were approximately 10% of Pr larger and smaller than values for the other two Moso bamboo forests. These results suggest that the difference in stem density greatly affects precipitation partitioning (i.e. Tf/Pr and Sf/Pr) but does not greatly change Ic/Pr. Copyright © 2012 John Wiley & Sons, Ltd.     

Analytical study on vulnerability functions for casualty estimation in the collapse of adobe buildings induced by earthquake

Collapse of adobe buildings during an earthquakes with various earthquake intensities is analyzed using the 3-dimensional distinct element method code developed by the first author. Firstly, we evaluate structural damage with damage index, interior-space damage with w score, and human casualties in the collapsing buildings with three casualty criteria. Secondly, we investigate relationships between the earthquake intensity, the structural damage, the interior-space damage, and the casualties. It is found that the casualties have stronger correlation with the interior-space damage than the structural damage, and three vulnerability functions, namely, structural, interior-space and casualty vulnerability functions, are proposed. Effects of reinforcing methods on these functions are also examined. Finally, a series of analytical procedures to develop vulnerability functions and to estimate casualties using the functions are described.     

Primary melt from Sannome-gata volcano,NE Japan arc: constraints on generation conditions of rear-arc magmas

The conditions under which rear-arc magmas are generated were estimated using primary basalts from the Sannome-gata volcano, located in the rear of the NE Japan arc. Scoriae from the volcano occur with abundant crustal and mantle xenoliths, suggesting that the magma ascended rapidly from the upper mantle. The scoriae show significant variations in their whole-rock compositions (7.9–11.1 wt% MgO). High-MgO scoriae (MgO > ~9.5 wt%) have mostly homogeneous ⁸⁷Sr/⁸⁶Sr ratios (0.70318–0.70320), whereas low-MgO scoriae (MgO < ~9 wt%) have higher ⁸⁷Sr/⁸⁶Sr ratios (>0.70327); ratios tend to increase with decreasing MgO content. The high-MgO scoriae are aphyric, containing ~5 vol% olivine microphenocrysts with Mg# [100 × Mg/(Mg + Fe²⁺)] of up to 90. In contrast, the low-MgO scoriae have crustal xenocrysts of plagioclase, alkali feldspar, and quartz, and the mineralogic modes correlate negatively with whole-rock MgO content. On the basis of these observations, it is inferred that the high-MgO scoriae represent primary or near-primary melts, while the low-MgO scoriae underwent considerable interaction with the crust. Using thermodynamic analysis of the observed petrological features of the high-MgO scoriae, the eruption temperature of the magmas was constrained to 1,160–1,220 °C. Given that the source mantle was depleted MORB-source mantle, the primary magma was plausibly generated by ~7 % melting of a garnet-bearing spinel peridotite; taking this into consideration, and considering the constraints of multi-component thermodynamics, we estimated that the primary Sannome-gata magma was generated in the source mantle with 0.5–0.6 wt% H₂O at 1,220–1,230 °C and at ~1.8 GPa, and that the H₂O content of the primary magma was 6–7 wt%. The rear-arc Sannome-gata magma was generated by a lower degree of melting of the mantle at greater depths and lower temperatures than the frontal-arc magma from the Iwate volcano, which was also estimated to be generated by ~15 % melting of the source mantle with 0.6–0.7 wt% H₂O at ~1,250 °C and at ~1.3 GPa.     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

The partitioning of Pt-Re-Os between solid and liquid metal in the Fe-Ni-S system at high pressure: Implications for inner core fractionation

Coupled ¹⁸⁶Os/¹⁸⁸Os and ¹⁸⁷Os/¹⁸⁸Os enrichments of plume-derived lavas have been suggested to reflect contributions of materials from the outer core (Brandon et al., 1998). This hypothesis is based on the assumption that the Earth’s liquid outer core has high Pt/Os and slightly high Re/Os ratios as a result of the crystallization of the solid inner core, and shows coupled enrichments in the ¹⁸⁶Os/¹⁸⁸Os and ¹⁸⁷Os/¹⁸⁸Os ratios, reflecting the decay of ¹⁹⁰Pt and ¹⁸⁷Re to ¹⁸⁶Os and ¹⁸⁷Os, respectively. Partitioning experiments of Pt-Re-Os between solid and liquid metal were performed at 5-20 GPa and 1250-1400 °C, to examine the effects of pressure in the Fe-Ni-S system. The ratios (D_Os/D_Pt, D_Os/D_Re) of measured partition coefficients of Pt, Re and Os are almost constant with increasing pressure. D_Os/D_Pt increases significantly, whereas D_Os/D_Re decreases, with increasing sulphur content in the liquid metal. On the basis of the present experimental results, it is unlikely that the required Pt-Re-Os fractionation is generated during inner core crystallization, assuming that the light element in the Earth’s core is sulphur.     

Geochemical study of the redistribution of elements in soil—I. Evaluation of degree of weathering of transported soil materials by distribution of major elements among the particle size fractions and soil extract

Sixteen alluvial and terrace soils from Japan and Thailand were separated into six fractions ; an amorphous sesquioxide and combined organic matter fraction, crystalline sesquioxides, clay, silt, fine sand and coarse sand. Content of ten major and minor elements in these six fractions was analyzed; SiO₂, A1₂O₃, Fe₂O₃, MgO, CaO, K₂O, TiO₂, Rb₂O and SrO were determined by X-ray fluorescence spectrometry, and Na₂O was determined by neutron activation analysis. The clay, silt, fine sand and coarse sand mineralogy were estimated semi-quantitatively by X-ray diffraction methods.We propose three indices of geochemical maturity for the soils and test their usefulness as measures of the degree of weathering. Three concomitant factors are proposed to measure the relative resistate, hydrolyzate and oxidate nature of the major elements in the soils.     

Observational Study of the Three-Dimensional Magnetic Field Structure and Mass Motion in Active Regions

Spectro-polarimetric observations of active regions were carried out in the spectral lines of Sii 10827.1 Å and Hei 10830 Å to study the three-dimensional magnetic field structure and associated plasma flow properties. Comparison of Sii and Hei magnetograms with the potential field model shows that a large fraction of the magnetic field is consistent with the potential field structure, by assuming that the height difference between the origin of the two lines is about 1200 km. The slope of the scatter plot between Sii and Hei magnetograms is 0.5, 0.76 in an emerging flux and a larger active region, respectively. These values are lower than the scatter plot slopes obtained from Kitt Peak photospheric and chromospheric magnetograms, in which case the corresponding values are 0.83 and 0.9, respectively. Considering the height difference between these two sets of chromospheric magnetograms, this implies that the magnetic field spreads out faster near the transition region heights. Dopplergrams obtained by determining the centroid of the asymmetric line profiles show that, in case of emerging flux region, the chromospheric upflow regions are located in the magnetic neutral line areas.     

Hydration and refractive indices of Holocene tephra glass in Hokkaido, Northern Japan

Refractive indices of incompletely hydrated tephra glasses vary widely. Thus, glass refractive index is not a practical indicator for identifying Holocene tephras. Hydration near the surface of tephra glass shards can be removed by either hydrofluoric acid treatment or annealing for 12 h at 400°C. The annealing procedure is a particularly reliable and simple way to dehydrate tephra glasses. Standard deviations (s) of refractive indices for glasses after 12 h annealing are small (s=0.0014–0.0018), in contrast with untreated glasses (s=0.0034–0.0405). The refractive indices of dehydrated tephra glasses are 0.006–0.014 lower than those of the untreated (hydrated) glasses. Using the 400°C 12-h annealing procedure, values for the refractive indices of eight Holocene tephras in Hokkaido were obtained. These refractive indices are useful indicators for identification and correlation of Holocene tephras.